メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 68を翻訳中

手順68
On the left rear, remove these three screws, #8-36, 5/16". The screw on the right is difficult to get to. Use a long thin screwdriver to loosen the screw a tiny bit, then a smaller screwdriver to remove the screw. The screw on the right holds down two parts.
  • On the left rear, remove these three screws, #8-36, 5/16".

  • The screw on the right is difficult to get to. Use a long thin screwdriver to loosen the screw a tiny bit, then a smaller screwdriver to remove the screw.

  • The screw on the right holds down two parts.

  • The screw on the left has a hook for a spring which runs along the length of the machine. You will likely be able to remove a short segment of the larger surrounding spring. Hook the end of the interior spring around the bushing after removing the short outer spring segment.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります