メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery. The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

ロジックボードにバッテリーコネクターを留めている2.3 mm プラスネジを1本外します。

ショートのリスクを減らすために、バッテリーブロッカーまたは改造した開口ピックを挿入してバッテリーの接続を外せます。

ロジックボードのバッテリーコネクターの下にバッテリーブロッカーを差し込み、作業中、この状態のままにしておきます。

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can insert a [product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
[* black] Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります