メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
Use the plastic opening tool to remove the black ring from the speaker. This will allow you to access the screws on the metal ring. Congratulations, you now have access to the rest of the speaker! For reassembly, the black ring cannot snap back into the speaker the way it was disassembled.  It must first go inside the black lip of the ear   cushion. The black lip is located on the back side of the ear cushion. Please refer to the last two pictures on this step.
Removing the plastic ring.
  • Use the plastic opening tool to remove the black ring from the speaker. This will allow you to access the screws on the metal ring.

  • Congratulations, you now have access to the rest of the speaker!

  • For reassembly, the black ring cannot snap back into the speaker the way it was disassembled. It must first go inside the black lip of the ear cushion. The black lip is located on the back side of the ear cushion. Please refer to the last two pictures on this step.

  • The black lip is located on the back side of the ear cushion.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります