Skip to main content
英語
日本語

手順 3を翻訳中

手順3
NOTE: This picture is simply used to identify the action required to release the electrical ribbons, but not the proper location for this step.
  • NOTE: This picture is simply used to identify the action required to release the electrical ribbons, but not the proper location for this step.

  • This step applies to the larger electrical ribbon connecting the LCD screen and circuit board.

  • Using a spudger, wedge the flat tipped end between the black bar and the circuit board.

  • Carefully lift the black bar into the vertical position.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります