メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 6を翻訳中

手順6
Turn the camera with the lens facing down. Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened. Use the blue opening tool to make lever. Insert the opening tool in the seam where the front case and the back case assemble.
  • Turn the camera with the lens facing down.

  • Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.

  • Use the blue opening tool to make lever. Insert the opening tool in the seam where the front case and the back case assemble.

  • Carefully make pressure downwards on the opening tool so the cover can gradually open.

  • Keep making pressure and slowly slide the opening tool through all the gap.

  • There is one point when the cover will disassemble completely.

  • When you are dissembling the back cover, the DC IN A/V OUT DIGITAL cover will also disassemble and fall off.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります