メインコンテンツにスキップ
英語
日本語

手順 7を翻訳中

手順7
With the wires placed in the correct position, the speaker and speaker cable wires are ready to be soldered. Starting with one terminal, place the "tinned" soldering iron on both the terminal and the wire  for 1-2 seconds. Then immediately place the soldering wire down on the terminal and speaker cable wire. When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.
  • With the wires placed in the correct position, the speaker and speaker cable wires are ready to be soldered.

  • Starting with one terminal, place the "tinned" soldering iron on both the terminal and the wire for 1-2 seconds. Then immediately place the soldering wire down on the terminal and speaker cable wire.

  • When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.

  • Repeat this process for each terminal on each speaker.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります