メインコンテンツにスキップ
英語
日本語

手順 18を翻訳中

手順18
Again use a small jewelers screw driver for the grommet of the crossover cable The elongated grommet for the main cable will have to be removed from the inside out. Here are the two small grommets for the mic and crossover cable, as well as the elongated one for the main cable.
  • Again use a small jewelers screw driver for the grommet of the crossover cable

  • The elongated grommet for the main cable will have to be removed from the inside out.

  • Here are the two small grommets for the mic and crossover cable, as well as the elongated one for the main cable.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります