Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 5を翻訳中

手順5
Remove the screw located below the multi-connector cover using a Phillips #00 screwdriver. Remove the two screws located at the bottom of the camera using a Phillips #00 screwdriver. Remove the screw inside of the battery and card compartment cover using a Phillips #00 screwdriver.
  • Remove the screw located below the multi-connector cover using a Phillips #00 screwdriver.

  • Remove the two screws located at the bottom of the camera using a Phillips #00 screwdriver.

  • Remove the screw inside of the battery and card compartment cover using a Phillips #00 screwdriver.

  • You will first have to open the compartment cover in order to expose the screw located inside of the battery and card compartment.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります