Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
Remove the two black speaker screws shown in red circles in the first image using a Phillips #00 screwdriver. After unscrewing the screws from the previous step, lift out the speaker plate when it becomes loose enough. Open the multi-connector cover shown in the yellow square in the fourth image.
  • Remove the two black speaker screws shown in red circles in the first image using a Phillips #00 screwdriver.

  • After unscrewing the screws from the previous step, lift out the speaker plate when it becomes loose enough.

  • Open the multi-connector cover shown in the yellow square in the fourth image.

  • The multi-connector compartment is used to connect an AV cable to another device. The multi-connector has a waterproof cover and also allows the device to display pictures on a television screen.

  • The side panel that covers the multi-connector and the speaker can be detached by sliding the side panel off of the device.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります