メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.
  • Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board.

  • The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

Usa uno spudger per scollegare il cavo piatto del connettore Lightning dalla sua presa sulla scheda logica.

Il cavo del connettore Lightning aderisce leggermente alla piastra sulla scheda madre. Stacca con cautela il cavo usando l'estremità piatta di uno spudger.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります