メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Locate the wireless card.  It is shown highlighted in picture one. Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card.  They are shown highlighted in picture two. Pull the card out of its slot and insert the new card.  Reattach the wires and reassemble the device.  Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.
  • Locate the wireless card. It is shown highlighted in picture one.

  • Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in picture two.

  • Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります