メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 1を翻訳中

手順1
Remove the six screws (Phillips #000, 2.3 mm long) holding the screen frame to the front of the case.  As the picture shows, one of them is hidden under the black speaker/rumble assembly. Remove the six screws (Phillips #000, 2.3 mm long) holding the screen frame to the front of the case.  As the picture shows, one of them is hidden under the black speaker/rumble assembly. Remove the six screws (Phillips #000, 2.3 mm long) holding the screen frame to the front of the case.  As the picture shows, one of them is hidden under the black speaker/rumble assembly.
  • Remove the six screws (Phillips #000, 2.3 mm long) holding the screen frame to the front of the case. As the picture shows, one of them is hidden under the black speaker/rumble assembly.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります