メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
中国語

手順 2を翻訳中

手順2
Using the pointed end of a spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below. There is a small, square, plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.
  • Using the pointed end of a spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below.

  • There is a small, square, plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.

  • If replacing the proximity sensor make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.

使用撬棒的尖头小心地将听筒连接线向上撬起,将相机和传感器线缆与下面的粘合剂分离。

传感器有一个小,方形,由塑料和金属制成的支架。 这个支架对于距离传感器能否正常工作至关重要。

如果更换距离传感器,请确保支架仍粘在屏幕上。 如果脱落,将其从旧的传感器中取出,使用一点点粘合剂来将其从新固定。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります