メインコンテンツにスキップ
英語
中国語

手順 4を翻訳中

手順4
With the blunt forceps remove the top part of the black tape connecting the charging port to the plastic portion of the controller. Grab the PCB of the charging port from the side and pull upwards slowly to remove from the controller. Do NOT pull the blue PCB rapidly upwards; instead move the piece side to side to create some free space between the controller and PCB.
  • With the blunt forceps remove the top part of the black tape connecting the charging port to the plastic portion of the controller.

  • Grab the PCB of the charging port from the side and pull upwards slowly to remove from the controller.

  • Do NOT pull the blue PCB rapidly upwards; instead move the piece side to side to create some free space between the controller and PCB.

使用镊子将充电口连接到控制器的塑料部分的黑色胶带的移除。

从侧面抓住充电端口的PCB板,缓慢向上拉以从控制器中取出。

不要将蓝色PCB板猛烈向上拉; 而是将组先件一边移动到另一边,以在控制器和PCB之间创建一些空间。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります