メインコンテンツにスキップ
英語
スペイン語

手順 4を翻訳中

手順4
With the blunt forceps remove the top part of the black tape connecting the charging port to the plastic portion of the controller. Grab the PCB of the charging port from the side and pull upwards slowly to remove from the controller. Do NOT pull the blue PCB rapidly upwards; instead move the piece side to side to create some free space between the controller and PCB.
  • With the blunt forceps remove the top part of the black tape connecting the charging port to the plastic portion of the controller.

  • Grab the PCB of the charging port from the side and pull upwards slowly to remove from the controller.

  • Do NOT pull the blue PCB rapidly upwards; instead move the piece side to side to create some free space between the controller and PCB.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります