メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 5を翻訳中

手順5
After the hard drive has been removed from the laptop, it must then be removed from its bracket. Start by gently pulling the HP hard drive adapter from the end of the hard drive. Using a Phillips #1 screwdriver, remove the four 3 mm bracketing screws on both sides of the hard drive bracket (2 per side) .
  • After the hard drive has been removed from the laptop, it must then be removed from its bracket.

  • Start by gently pulling the HP hard drive adapter from the end of the hard drive.

  • Using a Phillips #1 screwdriver, remove the four 3 mm bracketing screws on both sides of the hard drive bracket (2 per side) .

  • Lift the hard drive from its metal bracket.

  • Be careful not to touch the green underside as this may damage the hard drive.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります