メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers. Note the orientation of the cable and make sure it faces the right way when you reconnect it. After the two halves are separated, place the top of the controller off to the side.
  • Detach the motherboard ribbon connecting the two sides of the controller by pulling it straight out with your fingers.

  • Note the orientation of the cable and make sure it faces the right way when you reconnect it.

  • After the two halves are separated, place the top of the controller off to the side.

Stacca il nastrino della scheda madre che connette entrambi le parti della scocca del controller afferrandolo e tirando con le dita.

Ricorda l'orientamento del nastrino, perciò assicurati di reinserirlo nello stesso verso quando lo riconnetterai.

Non appena avrai separato le due metà della scocca, metti pure da parte quella superiore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります