メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 7を翻訳中

手順7
Now that the motherboard is out, this is the screen/digitizer/LCD assembly. From here, we need to only remove the digitizer. We recommend using a heat gun or a hot plate if you have one. If you don't have either, use a blow dryer! We recommend using a heat gun or a hot plate if you have one. If you don't have either, use a blow dryer!
  • Now that the motherboard is out, this is the screen/digitizer/LCD assembly. From here, we need to only remove the digitizer.

  • We recommend using a heat gun or a hot plate if you have one. If you don't have either, use a blow dryer!

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります