メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

英語
日本語

手順 4を翻訳中

手順4
Use the following steps to install the old trackpad into your new upper case. Reinstall the T6 Torx set screw until it is flush with the aluminum bracket surrounding the trackpad.
  • Use the following steps to install the old trackpad into your new upper case.

  • Reinstall the T6 Torx set screw until it is flush with the aluminum bracket surrounding the trackpad.

  • Place the trackpad back into its void in the upper case, being sure the lower tabs are inserted underneath the keyboard side of the upper case.

  • Be sure the trackpad ribbon cable is not pinched between the trackpad and the upper case.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります