メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Carefully remove the inside from the shell.
  • Carefully remove the inside from the shell.

  • Be careful not to touch any of the capacitor leads, or you may receive an electric shock.

  • If the inside sticks to one half of the shell, it's probably due to (a) glue around the edge of the A/C connector, and/or (b) foam glue between the inside and the flat of the shell.

  • Use a heavy duty spudger or other pry tool to pry the edge of the A/C connector from the shell, and carefully pry between the shell and the inside to break the foam glue.

  • Use only ESD-safe pry tools. Do not use metal pry tools or screwdrivers.

  • You may find the metallic sheeting breaks a little; that's okay, but try to minimize the damage!

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります