注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。
手順 11を翻訳中
手順11
Disconnecting the battery connector
-
Use a spudger or a clean fingernail to gently pry the battery connector up from its socket on the logic board.
[ [* black] Use [* icon_caution] Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the board. |
[ [* black] Use [* icon_caution] Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the board. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。