Skip to main content
英語
日本語

手順 5を翻訳中

手順5
Insert a plastic opening tool between the metal LCD frame and the front bezel. Be sure you are prying between the metal LCD frame and the front bezel, not between the metal LCD frame and the LCD.
  • Insert a plastic opening tool between the metal LCD frame and the front bezel.

  • Be sure you are prying between the metal LCD frame and the front bezel, not between the metal LCD frame and the LCD.

  • It may be necessary to reheat this area until the adhesive yields enough to insert the edge of a tool.

  • Use the flat end of a metal spudger to gently pry up the adhesive securing the metal LCD frame to the front bezel, taking special care not to scratch the LCD panel in the process.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります