メインコンテンツにスキップ
英語
中国語

手順 3を翻訳中

手順3
Next use a large ratchet wrench with a 19mm socket to remove the two bolts that hold the caliper to the vehicle.
Remove the calipers
  • Next use a large ratchet wrench with a 19mm socket to remove the two bolts that hold the caliper to the vehicle.

  • These bolts are in very tight, and had thread locker on them from the factory, so you may need a very long wrench or a breaker bar in order to get enough leverage to remove these two bolts.

  • Hold on to the caliper as you remove the second of the two bolts so it doesn't fall when you remove the bolt.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります