メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Next you will need to remove the soft rubber brake hoses. You will have to start by disconnecting the rubber hose from the hard line connection up inside the fender well. Then you can loosen it from the caliper and remove the line. This takes a 14mm wrench for the soft hose and an 11 mm wrench for the brake line.
Remove the rubber hoses
  • Next you will need to remove the soft rubber brake hoses.

  • You will have to start by disconnecting the rubber hose from the hard line connection up inside the fender well. Then you can loosen it from the caliper and remove the line. This takes a 14mm wrench for the soft hose and an 11 mm wrench for the brake line.

  • For more information and tips on removing these lines, [無効なガイドリンク]

  • Speaking of the rubber hoses, this is a great time to replace them with new parts if they show signs of age since they are already off of the car.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります