メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。

英語
日本語

手順 11を翻訳中

手順11
Use a spudger or a clean fingernail to gently pry the battery connector up from its socket on the logic board.
Disconnecting the battery connector
  • Use a spudger or a clean fingernail to gently pry the battery connector up from its socket on the logic board.

  • Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the board.

スパッジャーの平面側先端を使って、ロジックボードからバッテリコネクターを外します。

[*title] Disconnecting the battery connector
[*
black] Use the flat edge of a spudger or a clean fingernail to gently pry the battery connector up offfrom its socket on the logic board.
[* icon_caution] Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the
board.
[*title] Disconnecting the battery connector
[*
black] Use the flat edge of a spudger or a clean fingernail to gently pry the battery connector up offfrom its socket on the logic board.
[* icon_caution] Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the
board.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります