手順 8を翻訳中
手順8

-
Remove the CCD board from the D70, minding any cables that may get caught.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
Remove the CCD board from the D70, minding any cables that may get caught.
When reinstalling the CCD board, be sure to press the alignment posts on the right and bottom edges of the board up against the guides machined into the case while tightening the screws down.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
次の行
前の行
下に新しい行を挿入
上に新しい行を挿入
現在の行をインデントする
現在の行をインデント解除する
現在の行を削除する
次の手順に移動します。
前の手順に移動します。
ヘルプを開く