メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
You can now see the trunk actuator. It connects to the lock mechanism by the metal rod with a spring.
  • You can now see the trunk actuator. It connects to the lock mechanism by the metal rod with a spring.

  • To remove the actuator begin by removing the two hex head screws. They should be 8mm heads.

  • Then disconnect the two vacuum lines, making note of their orientation. One is for lock (red stripe), one is for unlock (green stripe).

  • Finally, pull the metal armature of the actuator off of the lock mechanism. It pulls off in the direction of the vacuum actuator body.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります