Skip to main content
英語
日本語

手順 4を翻訳中

Step 4
Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector Remove the heatsink clamps with a flathead screwdriver and do the same for the other side. Lift off the heatsink and remove the 4 screws of the CPU board.
  • Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector

  • Remove the heatsink clamps with a flathead screwdriver and do the same for the other side.

  • Lift off the heatsink and remove the 4 screws of the CPU board.

  • There are 4 pins: remove the 3 pins near the RAM but not the pin nearest You.

  • You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります