修理を始めるには

修理する権利

ストア

ガイドに戻る
英語
イタリア語
前の手順 次の手順

手順 3を翻訳中

手順3
Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart. You will have to cut through that plastic, go all the way around following that small space with your knife. This will take a while, you have to cut the plastic from all the 4 sides. You will notice when you have cut through most of it.

  • Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart.

  • You will have to cut through that plastic, go all the way around following that small space with your knife.

  • This will take a while, you have to cut the plastic from all the 4 sides. You will notice when you have cut through most of it.

  • Be careful with the side shown in the last picture. There are a couple of components that might be cut in the process.

Guarda la linea che attraversa il caricabatterie. Questi pezzi sono incollati con una super colla che ti impedisce di smontarli.

Dovrai tagliare attraverso la plastica seguendo quel piccolo spazio con un taglierino.

Questa operazione richiederà un po' di tempo, dovrai tagliare la plastica in tutti e quattro i lati. Quando ne avrai tagliata la maggior parte, te ne accorgerai.

Fai attenzione al lato mostrato nell'ultima foto, ci sono un paio di componenti che potrebbero venire tagliati inel corso di questa procedura.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。