メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 7を翻訳中

手順7
Loosen and remove the two 10mm nuts that hold the regulator's pegs in to the door shell. Loosen and remove the 10mm bolt that holds the final connection point of the regulator to the door shell. With these nuts and bolts removed the regulator is now loose from the door but more needs to be done before it can be removed fully.
  • Loosen and remove the two 10mm nuts that hold the regulator's pegs in to the door shell.

  • Loosen and remove the 10mm bolt that holds the final connection point of the regulator to the door shell.

  • With these nuts and bolts removed the regulator is now loose from the door but more needs to be done before it can be removed fully.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります