メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
Using a flat blade screw driver, gently pry on one of the two clips that hold the retaining rings over the diaphragms. Be gentle, as this is the weakest component of the entire assembly and there are no easily sourced replacements available for these.
  • Using a flat blade screw driver, gently pry on one of the two clips that hold the retaining rings over the diaphragms.

  • Be gentle, as this is the weakest component of the entire assembly and there are no easily sourced replacements available for these.

  • Remove the ring and set it aside after a gentle cleaning of the inside of the ring.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります