Skip to main content

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 1を翻訳中

Step 1
Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip. Using a nylon stick (or some other ESD safe probe) gently push both sides of the locking bar up. Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. This should barely require any force at all. Otherwise, check that the locking bar is fully disengaged.
  • Carefully note the brown colored locking bar that shims the ribbon cable in it's housing so it cannot slip.

  • Using a nylon stick (or some other ESD safe probe) gently push both sides of the locking bar up.

  • Now the ribbon cable should move freely. A careful prod using your nylon spudger should be able to free the cable. This should barely require any force at all. Otherwise, check that the locking bar is fully disengaged.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります