メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
With the camera laying with the lens up, use the spudger tool to grab the small square piece of rubber and gently pull it out. Note: Be careful not to pull on it too hard, the wires connected to it are short and could easily be pulled out or damaged. Note: Be careful not to pull on it too hard, the wires connected to it are short and could easily be pulled out or damaged.
  • With the camera laying with the lens up, use the spudger tool to grab the small square piece of rubber and gently pull it out.

  • Note: Be careful not to pull on it too hard, the wires connected to it are short and could easily be pulled out or damaged.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります