Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

Step 1
With the camera laying with the lens up, use the plastic pry tool to gently push the two gray tabs located on the edge of the camera face. Flip the camera over. With the camera laying face down, grab the gray cover on the side and gently remove it.
  • With the camera laying with the lens up, use the plastic pry tool to gently push the two gray tabs located on the edge of the camera face.

  • Flip the camera over. With the camera laying face down, grab the gray cover on the side and gently remove it.

  • Be careful not to handle the capacitor at the contacts, or you may get shocked.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります