メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Remove the two Torx screws to release the lower access panel and set it aside.
  • Remove the two Torx screws to release the lower access panel and set it aside.

  • Verify if there is water in the base and remove as much as you can with a rag (as pictured).

  • It is normal to see a small amount of water in there but if there is a large amount, this may be what is causing the float to remain up and you may have a different issue.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります