メインコンテンツにスキップ
英語
日本語

手順 13を翻訳中

手順13
Follow the ribbin cable to the blue connector on the laptop. There is a black bar that runs across the top of the cable. You should be able to flip this up with the tip of your finger into the unlocked position. If not, gently flip it upward using your flathead screwdriver.
  • Follow the ribbin cable to the blue connector on the laptop.

  • There is a black bar that runs across the top of the cable.

  • You should be able to flip this up with the tip of your finger into the unlocked position. If not, gently flip it upward using your flathead screwdriver.

  • Gently pull the ribbon cable from the connector.

  • The keyboard is now disconnected.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります