メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly. Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device. Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.
  • Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly.

  • Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.

  • Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.

  • Be sure to work carefully, as prying too firmly can crack the screen.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります