メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての32個のガイドに反映されます。

英語
中国語

手順 13を翻訳中

手順13
Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge. Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone. Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.
Opening up the phone
  • Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

  • In a pinch, you can use an unopened canned beverage to hold the display.

一旦连接器被撬开了后,把home键底端从机身上拉起,把手机顶端当做一个转动支点。

把显示屏立起来,保持跟机身成90度角。在你维修手机的过程中一直保持这个状态。

用橡皮筋把显示屏如图三所示固定住。这会避免在维修过程中显示屏电缆的损坏。

如有必要,你可以拿旁边顺手的、有一定重量的东西来固定显示屏,如未开的易拉罐瓶子。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります