Skip to main content

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての32個のガイドに反映されます。

英語
ドイツ語

手順 8を翻訳中

Step 8
Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them. Pull the plastic nub to release the vacuum seal on the suction cup.
  • Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.

  • Pull the plastic nub to release the vacuum seal on the suction cup.

  • Remove the suction cup from the screen.

Versuche nicht, die Display Einheit vollständig vom hinteren Gehäuse zu lösen, da beide immer noch durch mehrere Flachbandkabel verbunden sind.

Ziehe an an der Kunststoffnoppe, um das Vakuum des Saugnapfes zu öffnen.

Entferne den Saugnapf von der Display Einheit.

[* icon_caution] Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.
[* black] Pull the plastic nub to release the vacuum seal on the suction cup.
[* black] Remove the suction cup from the display assemblyscreen.
[* black] Remove the suction cup from the display assemblyscreen.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります