メインコンテンツにスキップ
英語
日本語

手順 10を翻訳中

手順10
Apply some flux to the solder points and the leg of the analog stick. Solder the connections in place. All points soldered back in place. The liquid black debris is flux. This can be removed by cleaning the board with some isopropyl alcohol after the soldering.
  • Apply some flux to the solder points and the leg of the analog stick.

  • Solder the connections in place.

  • All points soldered back in place. The liquid black debris is flux. This can be removed by cleaning the board with some isopropyl alcohol after the soldering.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります