メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
It is not necessary to peel all of the EMI tape off the optical drive bracket. Only peel up the portion highlighted in red that is attached to the body of the optical drive. Peel back the portion of aluminum tape highlighted in red, leaving the rest attached to the black plastic optical drive bracket.
  • It is not necessary to peel all of the EMI tape off the optical drive bracket. Only peel up the portion highlighted in red that is attached to the body of the optical drive.

  • Peel back the portion of aluminum tape highlighted in red, leaving the rest attached to the black plastic optical drive bracket.

Non è necessario staccare l'intero nastro di schermatura EMI dalla staffa dell'unità ottica. È sufficiente stacca la parte di alluminio

Stacca la parte di nastro in alluminio evidenziato in rosso, lasciando il resto attaccato alla staffa in plastica nera dell'unità ottica.

[* icon_note] It is not necessary to peel all of the EMI tape off the optical drive bracket. Only peel up the portion highlighted in red that is attached to the body of the optical drive.
[* blackred] Peel back the portion of aluminum tape highlighted in red, leaving the rest attached to the black plastic optical drive bracket.
[* blackred] Peel back the portion of aluminum tape highlighted in red, leaving the rest attached to the black plastic optical drive bracket.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります