メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

英語
中国語

手順 4を翻訳中

手順4
Rotate the display out of the outer case enough to disconnect the LED backlight power cable from the LED driver board. Disconnect the LED backlight power cable by depressing the locking mechanism while pulling the connector away from its socket (toward the bottom edge of the iMac). Disconnect the LED backlight power cable by depressing the locking mechanism while pulling the connector away from its socket (toward the bottom edge of the iMac).
  • Rotate the display out of the outer case enough to disconnect the LED backlight power cable from the LED driver board.

  • Disconnect the LED backlight power cable by depressing the locking mechanism while pulling the connector away from its socket (toward the bottom edge of the iMac).

将显示器从外壳提起到足高度来从LED驱动板上断开LED背光线缆。

通过按住锁定机构,同时将连接器从其插座(朝向iMac的底部边缘方向)拉出来,来断开LED背光电源线。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります