メインコンテンツにスキップ
英語
日本語

手順 8を翻訳中

手順8
Reattach the strain relief. It needs to fit under the two lugs on the circuit board above the solder points for the braid and core.
  • Reattach the strain relief. It needs to fit under the two lugs on the circuit board above the solder points for the braid and core.

  • This is just visible on the left hand side of the core in the picture. The right hand tab is a bit short of the tab on the right because I didn't get the cable decently centred!

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります