メインコンテンツにスキップ
英語
日本語

手順 11を翻訳中

手順11
Remove the two standoffs on the bottom (5mm socket) Unclip this clip and lift off the touchpad bezel The two ribbon cables in the third image (one I took out before taking the picture) are simply seated in their clips, you will need to apply some force to get them out, just be careful to apply it straight away from the clips.
  • Remove the two standoffs on the bottom (5mm socket)

  • Unclip this clip and lift off the touchpad bezel

  • The two ribbon cables in the third image (one I took out before taking the picture) are simply seated in their clips, you will need to apply some force to get them out, just be careful to apply it straight away from the clips.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります