メインコンテンツにスキップ
英語
日本語

手順 9を翻訳中

手順9
Time to take off the screen. A. Remove the screw on the left that holds the clip down, unclip it. B. Remove the four screws at the base of the screen, and lift out, taking care with the antenna wires on the right.
  • Time to take off the screen.

  • A. Remove the screw on the left that holds the clip down, unclip it.

  • B. Remove the four screws at the base of the screen, and lift out, taking care with the antenna wires on the right.

  • C. Thread them out of the clips, towards the touchpad. You can then pull them through the board, checking on the bottom to make sure they’re free.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります