Skip to main content
英語
スペイン語

手順 1を翻訳中

Step 1
Remove two T6 Torx screws from each side of the hard drive (four screws total). You'll need to transfer these screws to your new hard drive if you're changing drives.
  • Remove two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

Retira dos tornillos Torx T6 de cada lado del disco duro (cuatro tornillos en total).

Tendrás que transferir estos tornillos a tu nuevo disco duro si vas a cambiar de disco.

Si estás instalando un nuevo disco duro, tenemos una guía de instalación de OS X para ponerlo en marcha.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります