Skip to main content

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 1を翻訳中

手順1
Use the flat end of a spudger to gently pry between the flash assembly and back cover to separate the adhesive. Remove the flash assembly from the back cover. You may also need to transfer the camera lens and the silicon pad from the rear case. These can be removed by prying carefully with a plastic opening tool.
  • Use the flat end of a spudger to gently pry between the flash assembly and back cover to separate the adhesive.

  • Remove the flash assembly from the back cover.

  • You may also need to transfer the camera lens and the silicon pad from the rear case. These can be removed by prying carefully with a plastic opening tool.

  • Depending on the adhesive on the rear case, you may need to tape the flash assembly down to secure it.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります