Skip to main content
英語
日本語

手順 11を翻訳中

手順11
On the right side of the monitor, remove the remaining screws holding the upper shield in place. Lift the lower plate up while removing the power supply shield to remove it from the monitor. Once this is done, you will have access to the power supply. Removal of the lower shield is not required. However, it will make disassembly easier. If you choose to remove it, unclip the plastic tabs on the LCD bezel.
Remove the power supply shield (Part 2)
  • On the right side of the monitor, remove the remaining screws holding the upper shield in place.

  • Lift the lower plate up while removing the power supply shield to remove it from the monitor. Once this is done, you will have access to the power supply.

  • Removal of the lower shield is not required. However, it will make disassembly easier. If you choose to remove it, unclip the plastic tabs on the LCD bezel.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります