メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 3を翻訳中

手順3
Remove 4 fine threaded screws from the back of the monitor with a Phillips #0 screwdriver. All of these screws are the same type and length. This screw is unique and only goes in one place as the thread is different. Set it aside separately.
Remove the back of the monitor
  • Remove 4 fine threaded screws from the back of the monitor with a Phillips #0 screwdriver. All of these screws are the same type and length.

  • This screw is unique and only goes in one place as the thread is different. Set it aside separately.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります