メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

Step 4
This shows the corners with the screws removed. Remove the rubber feet by removing the Phillips head screws. On the left and right side of the amp is a Phillips head screw, located  1/3 down from the top and to the front. These two screws hold the front panel to which the speaker is attached. Remove those.
  • This shows the corners with the screws removed.

  • Remove the rubber feet by removing the Phillips head screws.

  • On the left and right side of the amp is a Phillips head screw, located 1/3 down from the top and to the front. These two screws hold the front panel to which the speaker is attached. Remove those.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります